| The Westec Insulation System consists of six basic components that are each designed to provide the critical elements of performance within a live fire.
- Framing system - Insulated steel channels are designed to resist all imposed loads while allowing the system to flex under thermal expansion.
- Westec Insulation Blanket - A 2" thick blanket that is stable at temperatures up to 2300°F*. The blanket in unaffected by flame, heat, cold, or chemicals.
- Stainless steel panels - Type 304 stainless steel is formed into rigid panels and provides unparalleled protection against impact and water pressure damage. The formed panels allow for thermal expansion across the width of the panels which are installed to expand freely along their lengths without buckling.
- Thermal break - There are no screw penetrations between the framing system and the stainless steel panels, providing a complete thermal break. This barrier prevents the direct transfer of heat through the framing system to the building structure.
- Flexing and sliding connections - The connecting elements from the framing system to the stainless steel panels are made from Type 304 stainless steel and are individually designed to allow the walls and ceiling to expand freely across the length and width of the room.
- Corner guards - All outside corners, doors, and window openings are continuously protected with heavy Type 304 stainless steel corner guard angles.
*For firefighter safety, Fire Facilities does not recommend training at temperatures in excess of 1200°F.
  |
|
Framing System |
Westec Insulation Blanket |
Stainless Steel Panels |
|
